Direct answer

Microgrid software comes in four kinds: planning tools that size and price the system (MicrogridModeler, HOMER, REopt, Xendee), engineering tools that prove the electrical network (ETAP, PowerFactory, PSCAD), controllers and energy management systems that run the site (Schneider Electric, Siemens, SEL, GE Vernova), and fleet platforms that operate many sites. Start with a free, auditable planning model, then hand the sized design to engineering and controls.

Key takeaways

  • Name the job before the product. Planning, engineering, control and fleet operation are different categories, and no product leads all four.
  • For planning, MicrogridModeler is our pick to start (and our product): free, browser-based and account-free, with hourly dispatch, sizing, historical weather risk, interval battery optimization and an export another analyst can rerun.
  • At list price, three planning seats for five years cost $0 with MicrogridModeler, REopt or SAM, $46,500 with HOMER Pro Professional and $97,200 with Xendee DESIGN Platinum.
  • Controllers are bought as projects, not downloads. Almost no vendor publishes a controller price, and most are delivered through integrators, EPCs, equipment partners or microgrid-as-a-service developers.
  • Ask controller vendors for IEEE 2030.7 functional coverage and 2030.8 test results. We found self-declared 2030.7 references but no published independent conformance test.
  • Ownership churn is real: Heila, Ageto, AutoGrid, PXiSE and Enchanted Rock have all been bought, renamed or retired from sale since 2021. Ask for a written roadmap.

Comparison matrix

CriterionMicrogridModelerHOMER ProREoptXendee DESIGN
List price (Nov 2026)$0 during early access; no account$1,575 to $4,650 per user per yearFree web tool, API and open-source REopt.jl$440 or $540 per user per month, billed annually
Where it runsAny modern browser; nothing to installWindows desktopBrowser, REST API and Julia packageCloud subscription
How it finds a designHourly simulation with a declared sizing search, Pareto set and robust mode; LP battery optimizer for interval dataSimulation with a grid search or proprietary derivative-free optimizerMILP with perfect foresightMILP co-optimizing investment and operation
Time stepHourly; 15, 30 or 60 minutes in Interval DispatchOne minute to hours (60-minute default)Hourly in the web tool; subhourly via APIHourly and subhourly
Network scopeSingle busSingle AC and/or DC busSingle node (multinode in REopt.jl)Multi-node with power flow and one-lines
Weather and outage risk10 historical NSRDB years with a feasible-year probability and P90 cost; outage survival from 4 hours to one weekSensitivity cases and a multi-year moduleOne representative year; outage constraints and an outage simulatorMulti-year optimization and resilience requirements
Evidence you can hand a reviewerHourly CSV, cash flow and a JSON run package with an input fingerprintResults tables, output files and proposalsResults downloads and API JSONReports, sharing and branded outputs
Our verdictStart here for auditable feasibility, sizing and quotesMature hybrid breadth and a large trained user baseThe open MILP reference and an ideal cross-checkEnterprise multi-node and multi-energy design

What is microgrid software?

Microgrid software is any program used to plan, engineer, control or operate a microgrid: a group of loads and energy resources that can run connected to the utility or on its own as an island. The market splits into four jobs, and no product leads all four. Planning software decides what to build and whether it pays. Engineering software proves the electrical network is safe and stable. Controller and energy management software runs the site second by second. Fleet software operates many sites, often for a utility or a developer.

Mixing up the categories is the most expensive buying mistake. An hourly planning model cannot prove relay coordination. A controller cannot tell you whether a 2 MWh or a 4 MWh battery gives the lower 25-year cost. Name the question first, then the category, then the product.

The four layers of microgrid software, plus the test layer that connects engineering to controls.
LayerQuestion it answersTypical outputsExamples
Planning and feasibilityWhat should we build, and does it pay?Sizes, hourly dispatch, fuel, lifecycle cost, outage survivalMicrogridModeler, HOMER, REopt, Xendee DESIGN, SAM, DER-VET, iHOGA
Engineering and simulationWill the electrical network work and stay safe?Power flow, short circuit, protection, arc flash, stability, transientsETAP, PowerFactory, PSCAD, CYME, EasyPower, OpenDSS
Controller and EMSHow does the site island, reconnect and dispatch?Control logic, transfer sequences, dispatch schedules, forecastsSchneider Electric, Siemens, SEL, GE Vernova, ETAP µGrid, Xendee OPERATE
Fleet and DERMSHow do we run and report on many sites?Telemetry, portfolio dispatch, market bids, analyticsGE Vernova GridOS, Uplight, OATI, Generac Concerto
Hardware-in-the-loop testingDoes the controller behave before the site is energized?Real-time simulation with the physical controller in the loopTyphoon HIL, OPAL-RT, RTDS

Where to start: MicrogridModeler, our pick for planning

MicrogridModeler is our product, so read this section as the publisher’s case and check it against the methodology. We built it for the first job on every microgrid project: decide what to build and whether it pays, before anyone buys an engineering license or a controller. The whole planning workflow runs in a browser. There is nothing to install, no account and no credit card, and it is free during early access.

The Modeler runs chronological 8,760-hour dispatch for PV, wind, batteries, diesel and natural-gas generators and the grid. It offers four off-grid dispatch policies (load following, cycle charging, diesel first and state-of-charge maintaining) plus grid-connected operation. Its sizing search evaluates a declared set of designs, refines the best candidates and returns a Pareto set, with an optional robust mode. Resilience studies test outage survival from 4 hours to one week, and NPS-style component failures and repairs. Lifecycle economics use dated, sourced cost defaults, and full OpenEI URDB tariffs import with tiers, time-of-use energy and demand charges.

Three 2026 additions take it past a quick screen. Historical weather risk downloads 10 NSRDB years and sizes to a feasible-year probability and a P90 lifecycle cost. Interval Dispatch optimizes a battery on native 15-, 30- or 60-minute meter data as a linear program (HiGHS), with demand ratchets, a hard backup reserve and wear cost, then audits the bill independently. The Quote Studio turns the same engine into commercial solar, storage, wind, gas and diesel proposals, with 5- to 20-year LCOE against utility only and cash, loan and lease views.

Every run exports what a reviewer needs: the hourly energy balance, cash flows, input provenance and a JSON run package with an input fingerprint. An optional REopt cross-check sends the same project to NLR’s REopt API so you can compare the two answers. The PV chain is checked against PVWatts 8.5.0, and the offline weather year is checked against PVWatts and PVGIS at 23 sites (19 within ±5%, mean 2.8%).

The boundary is deliberate. MicrogridModeler is a single-bus planning model. It does not run network power flow, protection coordination, short-circuit or transient studies, and it is not a field controller. Thermal, hydrogen and CHP systems, accounts and shared team workspaces are not in the product today. Those are the next layers of the stack, covered below, and the export is built to hand the sized design to them.

  • Best for: developers, EPCs, consultants, engineers and students who need a sizing and economics answer that another analyst can rerun.
  • Price: $0 during early access, no account.
  • Hand-off: export the hourly series and the JSON package to the engineering study and the controller vendor’s demonstration.

Sources for this section: MicrogridModeler methodology and limits · Interval Dispatch formulation · Pricing and early-access scope

Microgrid planning and design software compared

Planning software is where the money decision happens, and it is also the most crowded category. The tools differ less in which components they list than in how they search for a design. HOMER simulates many candidate systems and ranks the feasible ones. REopt, Xendee and DER-CAM solve a mixed-integer linear program, which finds the best design inside a simplified formulation, usually with perfect foresight of load and weather. iHOGA and Sandia’s toolkit use evolutionary search to trade several objectives at once. MicrogridModeler simulates hour by hour with explicit operating rules and a declared search, so every candidate it rejects can be inspected.

Two dividing lines matter more than any feature list. The first is network scope: HOMER, REopt’s web tool and MicrogridModeler model a single bus, while Xendee and DER-CAM represent multiple nodes and power flow. The second is time step: an hourly model is right for energy feasibility and wrong for proving a 15-minute demand peak or a controller event.

Planning and feasibility software, checked against vendor and laboratory pages on November 19, 2026. List prices exclude taxes, add-ons, services and enterprise terms.
ProductMethod and time stepAccess and list priceBest for
MicrogridModeler (our product)Chronological 8,760-hour simulation with a declared sizing search; separate 15-, 30- or 60-minute linear-program battery optimizerFree during early access; runs in a browser with no accountAuditable feasibility, sizing, economics and resilience; commercial quotes
HOMER Pro (UL Solutions)Chronological simulation with a grid search or a proprietary derivative-free optimizer; one minute to several hours (60-minute default)$1,575, $3,100 or $4,650 per user per year; Windows desktopRemote and island hybrid systems, sensitivity studies, training
HOMER Grid (UL Solutions)HOMER engine for behind-the-meter value stacking; one minute to several hours$4,200 per user per year on the annual plan, or $665 per monthNorth American C&I storage, demand charges, EV charging and proposals
HOMER Front (UL Solutions)Market-revenue dispatch optimization for storage and hybrid plantsQuote only; web applicationUtility-scale storage revenue and due diligence, not islanded microgrids
REopt (NLR, formerly NREL)Mixed-integer linear program with perfect foresight; hourly in the web tool, subhourly through the API and REopt.jlFree web tool and API; REopt.jl is open source (Apache-2.0)U.S. facility, campus and federal DER sizing; open optimization
Xendee DESIGNMILP that co-optimizes investment and operation; hourly and subhourly; multi-node with power flow$440 (Gold) or $540 (Platinum) per user per month, billed annually; 30-day paid demoMulti-node, multi-energy campus and portfolio design
SAM (NLR)Performance and financial simulation with parametric and P50/P90 runs; time step follows the weather fileFree; Windows, macOS and LinuxPV and storage yield and project finance beside a sizing tool
DER-VET (EPRI)Perfect-foresight LP/MILP; 15 minutes to 1 hourFree, BSD-3-Clause; v1.3.0 (December 2024) is still the latest releaseStorage value stacking for utilities, regulators and developers
DER-CAM (LBNL)MILP with linearized AC and DC optimal power flow; hourly typical-year profilesFree after registration; desktopFree multi-node, multi-energy optimization for researchers
NPS Microgrid PlannerDispatch with selectable controllers, enumerated sizing and disturbance-and-repair resilienceFree and open source (MIT-style); v4.0, September 2026; hosted with a login or self-hostedDefense installations and resilience research
Microgrid Design Toolkit (Sandia)Multi-objective evolutionary search with reliability simulation; returns a Pareto frontierFree download for Windows; Python interface (PyMDT)Trading cost against reliability for critical facilities
iHOGA / MHOGA (University of Zaragoza)Genetic-algorithm sizing with up to three objectives; steps down to one minute in PRO+iHOGA PRO+ €3,000 per year or €10,000 permanent; free EDU version limited to 7 kWh/dayOff-grid and mini-grid multi-objective sizing
ETB Developer (Energy Toolbase)Storage dispatch simulation on 15-minute interval data with a tariff and incentive libraryQuote only; demo offeredU.S. C&I solar-plus-storage proposals
GridcogInterval co-optimization at each market’s settlement resolution (5 to 30 minutes)Quote only; annual plansMarket-exposed hybrids in Australia, New Zealand, the UK and Europe; no U.S. market listed
RETScreen Expert (Natural Resources Canada)Pre-feasibility and benchmarking, not chronological dispatchFree viewer; Professional CAD $869 per year for up to 10 PCsEarly screening, government and education
PVsystDetailed PV simulation; stand-alone pre-sizing by loss-of-load probabilityPaid license; no public price pageBankable PV yield for the microgrid’s array
MiGRIDS Lite (Alaska Center for Energy and Power)First-order hourly energy balance with diesel minimum load and spinning reserveFree, AGPL-3.0 Python packageRemote diesel-grid renewable screening
MicroGridsPyLP/MILP mini-grid planning on the HiGHS solver; typical-year or multi-yearFree, EUPL-1.2Academic and NGO mini-grid planning
PyPSA, oemof-solph, CalliopeOpen LP/MILP energy-system frameworks; multi-node; you write the model in PythonFree (MIT, MIT, Apache-2.0)Researchers comfortable with code and solvers
Spreadsheet modelDaily, monthly or 8,760-hour energy balance with a cash flowFreeSanity checks; rarely dispatch-grade sizing

Sources for this section: HOMER Pro pricing · HOMER Pro optimization (manual) · HOMER Grid pricing · HOMER Front releases · REopt web tool user manual · REopt.jl repository · Xendee DESIGN pricing · SAM downloads · DER-VET software · DER-CAM (LBNL) · NPS Microgrid Planner · Sandia Microgrid Design Toolkit · iHOGA versions and prices · Energy Toolbase pricing · Gridcog markets · RETScreen subscription · MiGRIDS Lite · MicroGridsPy

Alternatives to HOMER, REopt, Xendee and the other incumbents

Most searches for an alternative start with a specific frustration: a license that costs too much for occasional use, a desktop-only workflow, a single-year model, or a tool that stops short of the network. Match the replacement to the frustration, not to the brand.

Common reasons teams look elsewhere, and where to look. Our product is listed first where it fits; the others are named on their documented strengths.
If you useAnd you needConsider
HOMER ProNo license cost, a browser workflow and an export another analyst can rerunMicrogridModeler; NPS Microgrid Planner for open-source code you can host
HOMER ProMulti-objective sizing (cost, emissions, unmet load) for off-grid systemsiHOGA PRO+, or Sandia’s Microgrid Design Toolkit for cost versus reliability
HOMER GridInterval-level battery dispatch against demand charges and ratchetsMicrogridModeler Interval Dispatch; ETB Developer or Xendee DESIGN for a commercial proposal workflow
REoptMulti-year historical weather risk and outage survival from one browser sessionMicrogridModeler (10 NSRDB years with a feasible-year probability and P90 cost)
REoptMulti-node campus networks with power flowXendee DESIGN or DER-CAM
Xendee DESIGNThe same early sizing decision without a $5,280-per-seat annual subscriptionMicrogridModeler for single-bus feasibility; REopt for an open MILP cross-check
DER-CAMAn actively released tool with a public version historyREopt.jl (v1.0.1, October 2026) or Xendee DESIGN
Energy ToolbaseOff-grid and outage studies alongside C&I economicsMicrogridModeler Quote Studio and Modeler; HOMER Grid
GridcogU.S. utility tariffs instead of wholesale market settlementMicrogridModeler (URDB tariffs), HOMER Grid or REopt
A spreadsheetHour-by-hour state of charge, generator minimum load and an optimizerMicrogridModeler; HOMER Pro; REopt

Microgrid engineering and simulation software

Engineering software proves the design is electrically sound. It answers questions an hourly planning model cannot see: whether breakers can interrupt the fault current an inverter-dominated island produces, whether protection still coordinates when the utility is gone, and whether frequency survives the moment of islanding. None of the tools below sizes a microgrid on lifecycle cost the way HOMER, REopt or MicrogridModeler do. They take a sized design and test it.

They work in three time domains. Steady-state and RMS tools (ETAP, PowerFactory, CYME, EasyPower, SKM, PSS®E) handle power flow, short circuit, protection, arc flash and stability. Quasi-static time-series tools (OpenDSS, GridLAB-D, Synergi, PowerFactory) run a feeder through a year of load and solar. Electromagnetic-transient tools (PSCAD, PowerFactory EMT, Simscape Electrical) model inverter switching and fast protection events.

The hand-off is real practice even though no vendor documents a direct import from a planning tool. AECOM, for example, used ETAP after the design stage of a wastewater-plant microgrid to validate power flow, short circuit, planned and unplanned islanding, transient stability and the sequence of operations.

Engineering and simulation software used on microgrids, checked November 19, 2026. Only SKM and Bentley (EasyPower) publish commercial prices.
ProductPrimary domainMicrogrid-relevant capabilityAccess and price
ETAP 2026Facility and utility design and analysis, plus its own microgrid controllerIslanding and transition studies, quasi-dynamic load flow with the controller in the loop, transient stability; 2026 adds unbalanced transient stability and DC arc flash for BESSQuote only; 3- or 5-year subscriptions
DIgSILENT PowerFactory 2026Planning and analysis across steady state, quasi-dynamic, RMS and EMTGrid-forming converter templates (virtual synchronous machine, droop) and an islanded MV microgrid example; 2026 adds impedance-based stability for inverter-based resourcesQuote only; 28-day demo
PSCAD/EMTDC v5.1.0Electromagnetic transient (EMT) simulationDetailed inverter and protection transients; EPRI generic grid-forming model in its knowledge baseQuote only; free edition limited to 15 nodes
Siemens PSS SINCAL 23.0Distribution and transmission planning, steady state to EMTNew harmonic-stability screening for PV and battery converters; imports PSS®E and CYMDIST modelsQuote only
Siemens PSS®E 36Transmission planningHybrid grid-forming inverter models; mostly relevant to large interconnectionsQuote only; monthly subscriptions
Eaton CYME 9.6Utility distribution analysisMicrogrid Modeling and Analysis module: islanded or isolated operation, isochronous or droop control, load sheddingQuote only
DNV Synergi Electric 7.0Utility distribution planningDistribution power flow and time series; no microgrid-specific module statedQuote only
EasyPower 2026 (Bentley)Facility electrical designHybrid AC/DC networks with PV, batteries and inverters; arc flash and protectionFrom $1,165 per year (12-month subscription)
SKM PowerTools 11Facility electrical designI*SIM transient stability for islanded systems (no infinite bus)Published 2026 price list: DAPPER from $2,450 (50 buses); I*SIM add-on $6,250
MATLAB/Simulink + Simscape Electrical R2026bControl design and simulation, phasor and EMTShipped microgrid examples for planned islanding, resynchronization and relay protectionPaid license; price depends on license type
OpenDSS 11 (EPRI)Distribution quasi-static time seriesGrid-forming PV mode “for energizing islanded microgrids”Free, open source (BSD)
GridLAB-D (PNNL) and Arras EnergyDistribution time series and co-simulationIslanded operation and dynamic grid-forming inverter modelsFree, open source

Sources for this section: ETAP microgrid solution · ETAP 2026 release · AECOM microgrid study in ETAP · PowerFactory 2026 release · PSCAD v5.1.0 release · PSS SINCAL 23.0 release information · DNV Synergi Electric · EasyPower (Bentley) · SKM 2026 price list · Simscape Electrical power-grid examples · OpenDSS PVSystem grid-forming mode · GridLAB-D microgrid features

Hardware-in-the-loop software for testing microgrid controllers

Hardware-in-the-loop (HIL) testing connects the real controller to a real-time simulation of the microgrid, so islanding, faults and black starts can be rehearsed before anything is energized. IEEE 2030.8 testing is usually run this way, and OPAL-RT and Typhoon HIL both cite it for microgrid controller tests. ETAP takes a related approach: its controller runs the same code that was tested against the ETAP model in software- or hardware-in-the-loop.

Real-time simulators used for microgrid controller testing, checked November 19, 2026.
PlatformTest typeMicrogrid capabilityAccess and price
Typhoon HIL 2026.3Controller hardware-in-the-loopMicrogrid HIL testbed; SunSpec Modbus modelsQuote only; free Virtual HIL
OPAL-RT HYPERSIM and RT-LABController and power hardware-in-the-loopMicrogrid HIL and PHIL with an IEEE 1547 inverter libraryQuote only
RTDS Simulator (RSCAD FX)Controller and power hardware-in-the-loopMicrogrid controller testbeds in real-time EMTQuote only

Sources for this section: Typhoon HIL grid modernization · Typhoon HIL 2026.3 highlights · OPAL-RT microgrid testing · RTDS microgrids and renewable energy

Microgrid controller and energy management software

A microgrid controller is the software, usually on dedicated hardware at the site, that decides when to island, how to hold voltage and frequency, which loads to shed, and how to resynchronize with the utility. IEEE 2030.7 splits this into a transition function and a dispatch function. Many vendors add a cloud energy management layer above it for forecasts, tariff optimization and market participation.

Controllers fall into three families. Switchgear and protection vendors (Schneider Electric, Siemens, SEL, Eaton, GE Vernova, S&C) sell engineered controllers for campuses and utilities. Generator and storage makers (Cummins, Caterpillar, Generac, ComAp, Woodward, FlexGen, Tesla) sell controllers built around their own equipment. Independent software controllers (ETAP µGrid, Spirae Wave, Xendee OPERATE as an optimization layer, and open-source OpenEMS) sit between. If your site mixes inverters, batteries, generators and EV chargers from different makers, put interoperability and the device list at the top of the request for proposal. History says the market is fragmented: across the 197 researched projects on Microgrid Projects, 77 different controller suppliers appear, and ABB (including Powercorp) is the only one named in more than five.

Apart from Energy Toolbase, which lists ETB Controller packages from $12,400, no vendor in our review publishes a controller price. Every product below is quoted per project.

Microgrid controllers and EMS, status as of November 19, 2026. “Active” means current product pages or 2025–2026 releases were found.
ProductOwnerWhat it does2026 status
EcoStruxure Microgrid Operation, Microgrid Advisor, Microgrid FlexSchneider ElectricOn-site controller (islanding, reconnection, load shedding), cloud EMS for forecasts and tariffs, and a packaged C&I microgridActive; Microgrid Flex sold through partners; alliance with American Microgrid Solutions, May 2026
SICAM Microgrid Control; Microgrid Integrated SwitchboardSiemensController on the SICAM A8000 platform: islanding, black start, resynchronization, load shedding, peak shaving, forecasting, EV load management; IEC 62443 citedActive; Integrated Switchboard launched October 29, 2026
powerMAXSELRTAC-based power management and control: islanding when the utility fails, resynchronization, “fast, intelligent load shedding” and economic dispatchActive; NREL chose an SEL controller after a 21-week, two-stage controller competition (2018)
GridNode Microgrid SolutionGE VernovaMicrogrid controller hardware, software and an energy management systemActive; 2025 brochures
ETAP µGrid / Microgrid ControllerETAP (80% Schneider Electric since 2021)Model-driven controller tested against the ETAP digital twin in software- or hardware-in-the-loop; DNP3, Modbus, IEC 61850Active
Power Xpert Microgrid Controller; Brightlayer EnergyEatonMicrogrid controller (guide specification cites IEEE 2030.7) and building energy optimization softwareBrightlayer Energy launched March 2026
e-mesh Control and PowerStoreHitachi EnergyController, EMS and battery systeme-mesh pages have redirected to Power Conversion since about May 2025; current status unconfirmed
PowerSecure microgrid controlsPowerSecure (Southern Company)Turnkey microgrids with in-house controls and remote monitoringActive
GridMindOATIController and DER optimizer tied to OATI’s utility DERMSActive; University of Minnesota Morris battery broke ground October 2026
XENDEE OPERATEXendeeForecast-driven optimization above local controls: demand charges, TOU, generators, CHP, marketsActive; Eaton led Xendee’s Series B, September 2025
ARC microgrid controllerGenerac (acquired Ageto, August 2024)Controller and cabinets for generator, solar and storage sitesActive under Generac
InteliNeo 6000 / 5500ComApHybrid master controller for gensets, PV and storage, with WebSupervisor monitoringActive; firmware 2.4.1, September 2026
easYgen-3000XTWoodwardGenset and hybrid paralleling controllersActive
PowerCommand MGC300 / MGC900CumminsGenset-centric microgrid controllers, from wall-mount to floor-standingActive
Microgrid Master ControllerCaterpillarMicrogrid controller sold through Cat dealersActive
HybridOSFlexGenBattery and hybrid-plant EMS and plant controllerv13, February 2026
Microgrid Controller and OpticasterTeslaController software on Tesla’s Site Controller, with optimization software, for Tesla storage sitesActive; Tesla storage only
GEMS Digital Energy PlatformWärtsiläPlant and microgrid controller with EMSWärtsilä’s storage business moved into the Valo joint venture, October 2026
WaveSpiraeIndependent, vendor-agnostic controller softwareActive; few public specifications
GridMasterS&C ElectricDistributed microgrid control systemActive
Ovation Microgrid ControlEmersonDistributed-control-system-based microgrid controlActive
Heila EDGERehlko (formerly Kohler Energy)Distributed edge controller for modular DERHeila’s website now redirects to Rehlko; current availability unclear
OpenEMSOpenEMS AssociationOpen-source energy management systemRelease 2026.11.0, October 31, 2026
Eclipse VOLTTRONEclipse Foundation (from PNNL)Open-source agent and control platformv9.3.0, November 3, 2026

Sources for this section: Schneider EcoStruxure Microgrid Operation · Schneider EcoStruxure Microgrid Advisor · Siemens Microgrid Control · Siemens Microgrid Integrated Switchboard launch · SEL microgrid control systems · ETAP microgrid management and control · OATI microgrids and asset controls · Xendee OPERATE · Generac acquires Ageto (pv magazine USA) · ComAp InteliNeo 5500 · Tesla microgrid controller · OpenEMS release 2026.11.0 · Eclipse VOLTTRON releases · Controller suppliers in 197 real microgrid projects (Microgrid Projects)

Fleet, DERMS and “grid operating system” platforms

A microgrid controller runs one site behind one point of interconnection. A distributed energy resource management system (DERMS), sometimes sold as a grid operating system, coordinates many sites and aggregators from a utility or portfolio control room. If you own one microgrid, you probably need a controller and maybe a cloud EMS. If you are a utility or run a fleet, you are shopping in this category.

Microgrid-as-a-service developers blur the line. ERock (formerly Enchanted Rock) runs its own GraniteEcosystem software across the natural-gas microgrids it builds and operates, but it does not sell that software on its own. Scale Microgrids and PowerSecure likewise bring their own controls and operations to the projects they finance or build.

Fleet and utility platforms most often compared with microgrid software, status as of November 19, 2026.
PlatformOwnerWhat it does2026 status
GridOSGE VernovaUtility orchestration portfolio: ADMS, DERMS and AEMSGridOS for Distribution launched February 3, 2026
Edge DERMS (formerly AutoGrid Flex)UplightUtility DERMS and virtual power plant softwareUplight bought AutoGrid (closed February 2024); Octopus Energy took a majority stake in Uplight in 2026
MEPPI DERMS (formerly Smarter Grid Solutions)Mitsubishi ElectricUtility DERMS including microgrid managementActive
ConcertoGenerac Grid ServicesUtility DERMS and VPP softwareActive
Mosaic and NisperaFluenceStorage bidding and asset-performance software, not a microgrid controllerActive
GraniteEcosystemERock (formerly Enchanted Rock)Control and fleet operations for ERock’s own natural-gas microgrids; not sold as standalone softwareERock listed on the NYSE, June 2026

Sources for this section: GE Vernova GridOS · GridOS for Distribution launch · Uplight acquires AutoGrid · Octopus Energy majority stake in Uplight · ERock company overview · ERock IPO pricing

IEEE 2030.7 and 2030.8: what to ask a controller vendor

IEEE 2030.7-2017 specifies what a microgrid controller must do: a transition function (planned and unplanned islanding, reconnection, black start) and a dispatch function. IEEE 2030.8-2018 specifies how to test those functions. A useful request for proposal cites 2030.7 for the functional requirements and 2030.8 for the acceptance tests.

Both standards are being revised. The 2030.7 revision project was approved in March 2025 and adds annexes for networked utility microgrids and data-center energy management; the 2017 edition is scheduled to become inactive in December 2027. The 2030.8 revision was approved in March 2026. IEEE 2030.12-2025 now adds a guide for microgrid protection design.

In our review, Xendee, Siemens and Eaton documents reference 2030.7, but we found no published independent conformance test report from any vendor. Treat a 2030.7 claim as self-declared until you see the test results, and ask to watch the 2030.8 tests run in hardware-in-the-loop on your own network model.

  • Which 2030.7 transitions and dispatch functions are implemented, and which are project-specific code?
  • Which 2030.8 tests were run, on what network model, and can we see the raw results?
  • Which device protocols (IEC 61850, DNP3, Modbus, SunSpec, OpenADR) and which inverter, battery, generator and charger models are supported without custom drivers?
  • Who owns the control code, the commissioning tests and future upgrades?

Sources for this section: IEEE 2030.7-2017 · IEEE P2030.7 revision project · IEEE 2030.8-2018 · IEEE P2030.8 revision project · IEEE 2030.12-2025 microgrid protection guide

How much microgrid software costs in 2026

Planning software is the only category with published prices, so it is the only one where a buyer can compute cost before a sales call. The table multiplies each published list price by five years and by three seats, a common size for a consulting or development team. It is arithmetic on list prices, not a quote.

Engineering software is licensed by module and network size and is quoted. Controllers, EMS and DERMS are priced per project, usually inside an equipment, integration or service contract. The one published controller price we found is Energy Toolbase’s ETB Controller, listed from $12,400. Among engineering suites, SKM publishes a full price list (DAPPER from $2,450 for 50 buses) and EasyPower starts at $1,165 per year.

Five-year list-price license cost for planning software, computed November 19, 2026. Excludes taxes, training add-ons, services, discounts and enterprise terms. Currencies are as published.
Product and planPer seat per yearOne seat, five yearsThree seats, five yearsNote
MicrogridModeler$0 during early access$0$0No paid plan is published; projects stay in the browser until exported
REopt, SAM, DER-VET, DER-CAM, Sandia MDT, NPS Microgrid Planner$0$0$0Free public tools; analyst time and data preparation are the real cost
HOMER Pro Base$1,575$7,875$23,625No add-on modules included
HOMER Pro Professional$3,100$15,500$46,500Any four modules and six hours of training
HOMER Pro Expert$4,650$23,250$69,750All modules and training
HOMER Grid (annual plan)$4,200$21,000$63,000Monthly billing is $665, or $39,900 per seat over five years
Xendee DESIGN Gold$5,280$26,400$79,200$440 per user per month, billed annually
Xendee DESIGN Platinum$6,480$32,400$97,200$540 per user per month, billed annually; adds modeling hours, custom tariffs, SSO and API access
RETScreen Expert ProfessionalCAD $869CAD $4,345CAD $4,345One subscription covers up to 10 PCs in an organization
iHOGA PRO+ (annual)€3,000€15,000€45,000A permanent license is €10,000 per seat with five years of updates

How microgrid software is bought and licensed

Planning software is bought directly: desktop seats (HOMER), cloud seats (Xendee), subscriptions (RETScreen), free public tools (REopt, SAM) or browser access with no account (MicrogridModeler). Engineering software is usually owned by the EPC or consulting engineer, not the site owner.

Controllers are almost never bought as a download. They arrive inside a project: through the controller maker’s integrator network, the EPC, the switchgear or battery supplier, or a microgrid-as-a-service developer that owns and runs the system. Schneider Electric, for example, trains and certifies EcoXpert partners on Microgrid Flex and delivers it with partners such as Scale Microgrids and American Microgrid Solutions. Xendee sells DESIGN seats directly and works with Eaton, which led its 2025 funding round.

The controller is also the decision with the most lock-in. Siemens’ head of microgrid strategy put it plainly in Microgrid Knowledge in 2021: “The microgrid system control is perhaps the most important procurement decision.” A competitive test is possible. In 2018 NREL ran a 21-week, two-stage controller competition: five controllers faced 100-minute simulated sequences with contingencies, the top two were tested on power hardware, and SEL was selected.

  1. Size the system and freeze the design basis in a planning model before asking for controller proposals.
  2. Write the controller specification against IEEE 2030.7 and list every device and protocol the controller must command.
  3. Require 2030.8 tests in hardware-in-the-loop on your network model before factory acceptance.
  4. Price the full term: hardware, software subscription, integration, commissioning, cybersecurity updates and the exit cost if the vendor or owner changes.

Sources for this section: Schneider Electric partner certification for Microgrid Flex (pv magazine USA) · Schneider and AMS microgrid alliance (Facilities Dive) · Eaton and Xendee partnership · Microgrid procurement (Microgrid Knowledge) · NREL controller procurement at ESIF (T&D World)

Which microgrid software should you use? Answers by role

These are our recommendations, including where we recommend our own product. Each one names the job first.

  • Developer or sales engineer screening sites: start in MicrogridModeler’s Quote Studio and Modeler for free, auditable sizing and LCOE. Add HOMER Grid or Xendee DESIGN if you need a maintained commercial tariff library and branded proposals.
  • Feasibility consultant for off-grid, island, mine or telecom sites: MicrogridModeler for transparent sizing with historical weather risk; HOMER Pro for subhourly breadth and its large user base; iHOGA when emissions or unmet load must be optimized alongside cost.
  • U.S. campus, hospital or industrial energy manager cutting demand charges: run MicrogridModeler Interval Dispatch on your own 15-minute data to set the achievable bill with a binding backup reserve, then make every controller or EMS vendor beat that number on the same data.
  • Mission-critical design lead (hospital, data center): a planning model for size and reserve, ETAP or PowerFactory for electrical validation, and a controller shortlist tested in hardware-in-the-loop. Our ETAP vs Xendee vs Schneider comparison covers the dispatch decision.
  • EPC electrical lead: ETAP, EasyPower or SKM for studies; controller submittals with IEEE 2030.8 test evidence; Typhoon HIL, OPAL-RT or RTDS for factory acceptance.
  • Electrical engineer specifying a multi-vendor U.S. microgrid (inverters, batteries, generators, EV chargers): start the shortlist with controllers whose documentation covers mixed equipment, such as Siemens SICAM Microgrid Control (CHP and EV load management), ETAP µGrid (DNP3, Modbus, IEC 61850) and independent software such as Spirae Wave, and demand a supported-device list before price.
  • Utility distribution planner: CYME, Synergi Electric, PowerFactory, PSS SINCAL or OpenDSS for the feeder; a DERMS such as GE Vernova GridOS for fleet operation.
  • DER operator running sites today: Xendee OPERATE, Schneider Microgrid Advisor or your controller maker’s EMS for forecast-driven dispatch; Fluence or FlexGen software for storage-heavy fleets.
  • Researcher or student: MicrogridModeler (no account), REopt.jl, NPS Microgrid Planner, PyPSA and OpenDSS. All are free and inspectable.

What the tutorials, manuals and studies show

Feature pages tell you what a tool can do. Tutorials and manuals show what using it is like. We read the transcripts of 26 tutorial and webinar videos from UL Solutions (HOMER), NLR, Xendee, ETAP, EPRI and university instructors, the official manuals, and five review papers. Seven patterns stood out.

  • HOMER is the default, and the literature shows it. A 2025 review of 2,667 Scopus documents found MATLAB/Simulink in 65.34% and HOMER in 22.08% of hybrid-microgrid studies. The most-watched HOMER tutorial on YouTube is an independent 2020 walkthrough with about 100,000 views; HOMER’s own short training series dates from 2016.
  • Even the laboratories point you elsewhere for sizing. In NREL’s August 2024 SAM webinar, the presenter said, “SAM is not a sizing optimization tool,” and panelists suggested REopt for diesel hybrids. The REopt manual says, “this is not a design tool,” and that investment decisions should not be made on its results alone.
  • Load data is the bottleneck, not the software. In a 2022 Xendee design session, the presenter called a full year of hourly load data the “critical point” that not every client has, and put setup at one or two hours once the data exists.
  • Battery realism can depend on the license. In a 2020 webinar, HOMER’s creator explained that HOMER “will assume it has full capacity until it’s ready to be replaced unless you’re using the advanced storage module.” HOMER Pro 3.18.5 (August 2026) added warranty-based degradation tables.
  • Same inputs, different answers. The IEA’s 2024 evaluation found HOMER Pro and iHOGA PRO+ both matched measured data from a real microgrid (net present cost within 0.44%), yet when each sized a Vermont system from scratch, their net present cost differed by 15.7%. Cross-check a design in a second engine before it reaches a client.
  • Shared servers have limits. After REopt moved to open-source solvers in April 2024, NLR warned of “longer solve times and timeout errors,” and in spring 2025 users on REopt’s GitHub reported hour-long runs and outages; NLR later said the run-time problems came from its servers and had been resolved. MicrogridModeler’s Modeler runs the simulation in your own browser rather than on a shared server.
  • Desktop or browser. HOMER Pro, iHOGA and RETScreen are Windows desktop programs; HOMER’s FAQ says a native Mac or Linux version “does not make financial sense.” SAM runs on Windows, macOS and Linux. REopt, Xendee and MicrogridModeler run in a browser.

Sources for this section: Tahir (2025), optimization techniques and software tools in hybrid microgrids, Energies 18(7):1770 · Kavadias and Triantafyllou (2021), most-used HRES software tools, Energies 14(24):8268 · Video: Tour of HOMER Pro webinar (UL Solutions, 2020) · Video: HOMER tutorial, installation and microgrid design (independent, 2020) · Video: Modeling hybrid systems in SAM (2024) · Video: How to design a microgrid with Xendee (2022) · Video: Microgrid 101, real modeling example in Xendee (2025) · Video: ETAP microgrid management, design and validation (2020) · REopt solver transition notice (GitHub discussion) · REopt run-time reports (GitHub discussion) · HOMER Pro pre-sale FAQ

What changed in 2025 and 2026: acquisitions, renames and new releases

Microgrid software ownership has moved faster than most buyers’ vendor lists. A product that changed hands can still be well supported, but ask for a written roadmap before you build a 20-year asset around it.

Ownership and product changes relevant to microgrid software buyers, checked November 19, 2026.
Product or companyWhat changedWhat to check
ETAPSchneider Electric bought an 80% stake (June 2021) and says ETAP continues as an agnostic, independent software vendorAsk how non-Schneider equipment is supported
Heila TechnologiesBought by Kohler (January 2022); Kohler Energy became Rehlko (September 2024)Confirm Heila EDGE is still sold and supported
AutoGridBought by Uplight (closed February 2024); Octopus Energy then took a majority stake in UplightCheck the roadmap for AutoGrid Flex customers
AgetoBought by Generac (August 2024); its controller continues as Generac ARCCheck support for non-Generac generators
PXiSEOwned by Yokogawa since 2021; now trades as BaxEnergy Americas, where its microgrid controller appears among legacy productsConfirm support terms and a migration path
Hitachi Energy e-meshProduct pages redirect to Power Conversion since about May 2025Ask Hitachi Energy for written product status
Enchanted RockRenamed ERock; IPO on the NYSE, June 11, 2026Its software comes only with its own microgrids
Wärtsilä energy storageMoved into the Valo joint venture, October 1, 2026Confirm where GEMS support now sits
NREL toolsNREL now operates as the National Laboratory of the Rockies (NLR); REopt and SAM moved to nlr.gov and the code to GitHub’s NatLabRockies organizationUpdate bookmarks and API base URLs
REopt.jlv1.0.0 (October 5, 2026) updated default PV, wind and battery costs to the 2025 ATBRe-run saved cases before comparing to old results
HOMERHOMER Pro 3.18.5 and HOMER Grid 1.11.7 (August 2026) added battery degradation tables and augmentation; HOMER Front 1.6 (October 2026)The online manuals are still labelled 3.16 (Pro) and 1.9 (Grid)
iHOGAVersion 4.0 (June 2026); PRO+ now €3,000 per year or €10,000 permanentThe 2024 IEA report listed €500 for six months

Sources for this section: Kohler buys Heila (Canary Media) · Kohler Energy rebrands as Rehlko · Yokogawa acquires PXiSE · BaxEnergy Americas · HOMER Pro releases · REopt.jl releases

How the layers hand off on a real project

The categories are a relay, not a menu. Each layer should receive a frozen, documented basis from the one before it, so that a change can be traced back to a number.

  1. Plan: build the load and resource basis, size the system, set the outage requirement and run sensitivities. Export the hourly series and the run package.
  2. Cross-check: run the same case in a second planning engine (MicrogridModeler’s REopt cross-check does this for you) and explain any difference before it reaches a client.
  3. Engineer: model the network in ETAP, PowerFactory or a similar tool. Run power flow, short circuit, protection coordination, arc flash and the islanding transients the planning model cannot see.
  4. Specify controls: write the controller requirements against IEEE 2030.7, using the planning model’s dispatch rules and reserve as the operating intent.
  5. Test: run IEEE 2030.8 tests with the real controller in hardware-in-the-loop before factory acceptance.
  6. Operate: compare metered performance with the planning model each year, and update the model when the load or tariff changes.

How we built this comparison

We reviewed vendor product pages, pricing pages, release notes, official manuals and datasheets, laboratory documentation, IEEE standards records and official tutorial videos on November 19, 2026. Prices are the public list prices on that date. We did not buy or run any paid competitor product, and nothing here is a head-to-head benchmark. MicrogridModeler is our product; the recommendations above say so where they name it.

A missing public detail is a question for the vendor, not evidence that a feature is absent. Controllers in particular publish little, and a few vendor sites blocked automated reading, so some 2026 statuses are marked as unconfirmed rather than guessed. Send corrections through the contact page and we will re-check the row.

Keep exploring

Sources and review notes

This comparison is based on current public product and documentation pages. Verify licenses, modules, and pricing before making a procurement decision.

Product and company names on this site, such as HOMER, REopt, PVWatts, Xendee and Energy Toolbase, may be trademarks of their respective owners and are used only to identify those products and companies. MicrogridModeler is independent and is not affiliated with, sponsored by or endorsed by them, or by DOE or NLR (formerly NREL), unless a page says otherwise.

HOMER Pro pricingReviewed November 19, 2026. Primary vendor price page; list prices.HOMER Grid pricingReviewed November 19, 2026. Primary vendor price page; list prices.Xendee DESIGN pricingReviewed November 19, 2026. Primary vendor price page; list prices and plan contents.Xendee FAQReviewed November 19, 2026. Primary vendor documentation for method and scope.REopt web tool user manualReviewed November 19, 2026. Laboratory manual; method, time step and stated limitations.SAM downloadsReviewed November 19, 2026. Laboratory download page; current version.IEA PVPS Task 18: software tools for standalone microgrid designReviewed November 19, 2026. Independent 2024 evaluation of HOMER Pro and iHOGA PRO+ against measured data.Sandia SAND2019-2436, networked microgrid design capabilitiesReviewed November 19, 2026. Laboratory review comparing REopt, DER-CAM, MDT and other planning tools.IEEE 2030.7-2017Reviewed November 19, 2026. Standards record; controller specification.IEEE 2030.8-2018Reviewed November 19, 2026. Standards record; controller testing.Schneider EcoStruxure Microgrid OperationReviewed November 19, 2026. Primary vendor product page.Siemens Microgrid ControlReviewed November 19, 2026. Primary vendor product page.ETAP microgrid management and controlReviewed November 19, 2026. Primary vendor product page.MicrogridModeler methodologyReviewed November 19, 2026. Publisher’s own methodology, validation and limits.DIgSILENT PowerFactoryReviewed November 19, 2026. Primary vendor product page.PSCAD overviewReviewed November 19, 2026. Primary vendor product page.Cuesta, Castillo-Calzadilla and Borges (2020), social indicators in HRES modeling toolsReviewed November 19, 2026. Peer-reviewed review; social factors absent from popular design tools.

FAQ

What is the best microgrid software?

It depends on the job. For planning, we recommend starting with MicrogridModeler (our product) because it is free, runs in a browser and exports evidence another analyst can rerun; HOMER Pro, REopt and Xendee DESIGN lead in hybrid breadth, open optimization and multi-node design respectively. For engineering, ETAP and PowerFactory are the common choices. For controls, shortlist by your equipment and test in hardware-in-the-loop.

Is there free microgrid software?

Yes. MicrogridModeler is free during early access with no account. REopt, SAM, DER-CAM, DER-VET, Sandia’s Microgrid Design Toolkit and NPS Microgrid Planner are free public tools, and OpenDSS, GridLAB-D, PyPSA, OpenEMS and VOLTTRON are open source.

What is the difference between microgrid design software and a microgrid controller?

Design software decides what to build and whether it pays, using simulated load and weather. A controller runs the built site: it islands, holds voltage and frequency, sheds loads, resynchronizes and dispatches equipment. IEEE 2030.7 specifies controller functions; design tools have no equivalent standard.

HOMER Pro or HOMER Grid?

HOMER Pro targets remote, island and off-grid hybrid systems with optional modules; HOMER Grid targets grid-connected, behind-the-meter economics with a North American tariff library, EV charging and proposals. They are separate licenses: $1,575 to $4,650 per user per year for Pro and $4,200 per year for Grid on the annual plan.

What software supports hardware-in-the-loop testing for microgrids?

Typhoon HIL, OPAL-RT and RTDS are the main real-time simulators used to test microgrid controllers before commissioning, and ETAP validates its own controller against its digital twin. Use them to run IEEE 2030.8 tests with the physical controller in the loop.

How much does microgrid software cost?

Planning software ranges from $0 (MicrogridModeler, REopt, SAM) to $6,480 per user per year (Xendee DESIGN Platinum) at list price. Engineering suites are quoted by module, and controllers, EMS and DERMS are priced per project.

Size the microgrid before you buy anything else

Run the planning model free in your browser, see every hour of dispatch and every dollar of cost, then hand the export to your engineer and controller vendor.